binding wireBuy from us according to the standard for accessories for reinforcement according to DIN 488 and delivered throughout Germany. Binding wire is soft, annealed wire for slendering and fixing the reinforcement in the formwork. On this page you will find all information about binding wire: features, applications, processing, standards, quality and ordering.
What are binding wire?
Binding wire is soft, annealed wire for slendering and fixing the reinforcement in the formwork. As a specialist retailer for reinforcing steel, we deliver binding wire of consistent quality, documented in accordance with the standards and on time to the construction site. Our site offers an overview of the entire rangespacer.
Characteristics of binding wire
- annealed soft wire
- Diameter 1.0-1.4 mm
- galvanized or blank
- As a ring, roll or towel wire
- High flexibility for twisting
| characteristic value | Specification |
|---|---|
| Product | binding wire |
| Material | annealed steel wire |
| Standard | Accessories for reinforcement according to DIN 488 |
| Delivery | Germany-wide, on request roof |
| Production | Custom made / list |
Binding Wire Applications
Binding wire are used in reinforced concrete construction primarily for:
- Fixing rods and mats
- Fastening spacers
- Securing baskets and ironing
- All rubble work on the construction site
The concrete selection and dimensioning results from the static calculation according to Eurocode 2.reinforcing steelandstructural steel mats.
Binding wire according to DIN 488 and Eurocode 2
The used reinforcement steel is compliant with the product standard for reinforcement according to DIN 488. For design and execution – concrete covering, anchoring, overlapping and minimum reinforcement – Eurocode 2 (DIN EN 1992-1-1) applies. This means that binding wire is load-bearing, durable and verifiable. Each delivery is made with the required proof.
processing and installation
Binding wire are positioned according to the reinforcement plan, fixed with binding wire and held in the planned concrete cover via spacers. Shocks and connections are executed over the required overlap lengths. Factory-assembled elements significantly reduce the assembly time on the construction site, since cutting and bending work is no longer necessary.
Quality, test certificate and traceability
We supply binding wire with work certificate (acceptance test certificate 3.1) and proof of conformity. The reinforcement steel used can be traced via the batch and melt number – this gives you standard-compliant, documented reinforcement that meets the requirements of DIN 488 and Eurocode 2.
economy and prefabrication
Prefabricated binding wire save time and costs: They are delivered ready for installation, reduce waste and speed up the construction process. Those who plan material, dimensions and delivery dates cleanly reinforce their standards and economically. We would be happy to create a position from your reinforcement list.
Concrete cover and exposure classes
The durability of reinforced concrete depends crucially on the concrete cover. The Eurocode 2 (DIN EN 1992-1-1) sets the minimum concrete coverage, depending on the exposure class (e.g. XC1 for dry interiors, XC4 for alternating wet areas, XD/XS for chloride loaded areas). feast. For binding wire, spacers at the appropriate height are used to reliably comply with this dimension. Insufficient concrete cover leads to corrosion and cracks; A correctly executed cover ensures the planned useful life. Fittingspacerwe deliver with.
| exposure class | Typical environment | Minimum Concrete Coverage (Guide Value) |
|---|---|---|
| XC1 | Dry interiors | approx. 20 mm |
| XC3 / XC4 | External parts, alternating damp | approx. 25-35 mm |
| xD / XS | de-icing salt, sea water | approx. 40-55 mm |
The exact values result from the exposure class, concrete strength and verification according to Eurocode 2.
anchoring and overlap
To ensure that the tensile forces are safely introduced into the concrete, rods must be sufficiently anchored and pushed. The required anchoring length and joint length of joints depend on the grade of steel, diameter, concrete strength and composite conditions. In the case of binding wire, these lengths are taken into account in the reinforcement plan – as a fist value, overlapping lengths in the ribbed reinforcing steel are in the range of 40 to 60 times the diameter of the bar, depending on the boundary conditions. The static calculation is always decisive.
Tolerances and quality features according to DIN 488
DIN 488 not only regulates the material parameters, but also dimensional tolerances, rib geometry and marking of the reinforcing steel. Ribbed reinforcing steel is clearly identifiable on its rib pattern; The yield point is 500 N/mm². For binding wire, this means: defined bending dimensions, consistent quality and a complete allocation to standard and batch. This verifiability is the basis of any statically load-bearing reinforcement.
Quantity determination and calculation
For the calculation of binding wire, the number of pieces, the length of the rod and – in the case of reinforcing steel – the meter weight are used. The weight of a ribbed steel is calculated according to the formula Weight (kg/m) = d² × 0.00617 with D in millimeters. The total weight, which forms the basis for the preparation of the offer, can be determined from the parts list or reinforcement plan. Send us your list – we calculate the position and name a binding fixed price offer.
Alternatives and suitable additions
Depending on the construction task, binding wire can be combined with other reinforcement products. Proven additions arespacer,reinforcing steelas well asstructural steel mats. Which combination makes economic and static sense depends on the component and the prefabrication depth. We advise you on the appropriate compilation.
Common mistakes – and how to avoid them
- Wrong concrete cover:Without suitable spacers there is a risk of corrosion – match the height to the exposure class.
- Too Short Overlap:Do not estimate shocks according to static specifications.
- Confused positions:Clearly label the components and install them according to the reinforcement plan.
- Missing documentation:The reinforcement can only be tested and approved with a work certificate.
Sustainability of binding wire
Reinforced steel is almost 100% recyclable and is mainly made from scrap in the electric arc furnace. A needs-based prefabrication of binding wire reduces waste and transport. Those who plan quantities and dimensions cleanly not only build in accordance with the standards, but also in a resource-saving manner – an advantage that is increasingly in demand when it comes to proof of sustainability.
Why buy from us?
- Standard binding wire according to accessories for reinforcement according to DIN 488
- Production according to your reinforcement or list
- Work certificate (3.1) and traceability
- Germany-wide delivery, roof on request
- Binding fixed price offer without hidden costs
Delivery of binding wire
We deliver binding wire throughout Germany and on request to Austria, Switzerland and Luxembourg – from the individual position to the complete component reinforcement, position exactly according to your list. A realistic delivery date and the unloading point will be coordinated in advance.
Order binding wire – step by step
- Provide reinforcement plan or list or dimensions and quantity
- Define product and execution
- Request a non-binding fixed price offer
- Vote for delivery date and unloading point
- Position-accurate delivery to the construction site
You can get your offer on our websiteContact.
Conclusion: binding wire
Binding wire are standard-compliant reinforcement according to accessories for reinforcement according to DIN 488 – soft, annealed wire for rubbing and fixing the reinforcement in the formwork. With factory prefabrication, complete documentation and Germany-wide delivery, you will receive sustainable, durable and economic reinforcement. Request your fixed price offer.
Frequently asked questions about binding wire
What material are binding wire made of?
Binding wire are made of annealed steel wire and are manufactured according to accessories for reinforcement according to DIN 488.
What are binding wire used for?
Binding wire are used, among other things, for fixing rods and mats, securing spacers, securing baskets and temples. The exact selection is given by the statics.
Are binding wire made to measure?
yes We manufacture binding wire project-related according to your reinforcement or list and deliver position exactly.
Do you supply binding wire with test certificate?
yes Binding wire are supplied with work certificate (3.1) and proof of conformity and are traceable.
Where do you deliver binding wire?
We deliver binding wire throughout Germany and on request to Austria, Switzerland and Luxembourg.
Weiterführende Quellen: Betonstahl (Wikipedia), Bewehrung im Stahlbetonbau. Buy Binding Wire & erhalten Sie bei der Bewehrungsstahl Deutschland GmbH normgerecht nach DIN 488 – projektbezogen und bundesweit geliefert.