Reinforcing bars 6 mBuy from us in accordance with DIN 488 and delivered throughout Germany. Reinforced steel bars 6 m are B500B standard length 6.00 m as a bearing length for flexible processing on the construction site. On this page you will find all information about reinforcing bars 6 m: features, applications, workmanship, standards, quality and order.
What are rebar bars 6 m?
Reinforced steel bars 6 m are B500B standard length 6.00 m as a bearing length for flexible processing on the construction site. As a specialist retailer for reinforcing steel, we deliver 6 m of reinforcing steel bars of 6 m of consistent quality, documented in accordance with the standards and on time to the construction site. Our site offers an overview of the entire range12m poles.
Features of reinforcing bars 6 m
- Standard length 6.00 m
- Reinforced steel B500B according to DIN 488
- Diameter 6-16 mm common
- Easy to transport
- Can be cut off on the construction site
| characteristic value | Specification |
|---|---|
| Product | Reinforcing bars 6 m |
| Material | Reinforcing steel B500B |
| Standard | DIN 488 |
| Delivery | Germany-wide, on request roof |
| Production | Custom made / list |
Applications for reinforcing bars 6 m
Reinforced steel bars 6 m are mainly used in reinforced concrete construction for:
- Smaller construction sites
- repairs
- Flexible Reinforcement
- hand processing
The concrete selection and dimensioning results from the static calculation according to Eurocode 2.straight cutandreinforcing steel.
Reinforced steel bars 6 m according to DIN 488 and Eurocode 2
The reinforcement steel used corresponds to the DIN 488 product standard. The Eurocode 2 (DIN EN 1992-1-1) applies to design and execution – concrete cover, anchorage, overlap and minimum reinforcement. This means that reinforcement bars are 6 m load-bearing, durable and verifiable. Each delivery is made with the required proof.
processing and installation
Reinforcement bars 6 m are positioned according to the reinforcement plan, fixed with binding wire and held in the planned concrete cover via spacers. Shocks and connections are executed over the required overlap lengths. Factory-assembled elements significantly reduce the assembly time on the construction site, since cutting and bending work is no longer necessary.
Quality, test certificate and traceability
We supply reinforcing bars 6 m with work certificate (acceptance test certificate 3.1) and proof of conformity. The reinforcement steel used can be traced via the batch and melt number – this gives you standard-compliant, documented reinforcement that meets the requirements of DIN 488 and Eurocode 2.
economy and prefabrication
Prefabricated reinforcing bars 6 m Save time and costs: They are delivered ready for installation, reduce waste and speed up the construction process. Those who plan material, dimensions and delivery dates cleanly reinforce their standards and economically. We would be happy to create a position from your reinforcement list.
Concrete cover and exposure classes
The durability of reinforced concrete depends crucially on the concrete cover. The Eurocode 2 (DIN EN 1992-1-1) sets the minimum concrete coverage, depending on the exposure class (e.g. XC1 for dry interiors, XC4 for alternating wet areas, XD/XS for chloride loaded areas). feast. For reinforcing bars 6 m, spacers at the appropriate height are used to reliably maintain this dimension. Insufficient concrete cover leads to corrosion and cracks; A correctly executed cover ensures the planned useful life. Fittingspacerwe deliver with.
| exposure class | Typical environment | Minimum Concrete Coverage (Guide Value) |
|---|---|---|
| XC1 | Dry interiors | approx. 20 mm |
| XC3 / XC4 | External parts, alternating damp | approx. 25-35 mm |
| xD / XS | de-icing salt, sea water | approx. 40-55 mm |
The exact values result from the exposure class, concrete strength and verification according to Eurocode 2.
anchoring and overlap
To ensure that the tensile forces are safely introduced into the concrete, rods must be sufficiently anchored and pushed. The required anchoring length and joint length of joints depend on the grade of steel, diameter, concrete strength and composite conditions. With reinforcement bars 6 m, these lengths are taken into account in the reinforcement plan – as a fist value, overlap lengths in the ribbed reinforcing steel are in the range of 40 to 60 times the rod diameter, depending on the boundary conditions. The static calculation is always decisive.
Tolerances and quality features according to DIN 488
DIN 488 not only regulates the material parameters, but also dimensional tolerances, rib geometry and marking of the reinforcing steel. Ribbed reinforcing steel is clearly identifiable on its rib pattern; The yield point is 500 N/mm². For reinforcing bars 6 m, this means: defined bending dimensions, consistent quality and a complete allocation to standard and batch. This verifiability is the basis of any statically load-bearing reinforcement.
Quantity determination and calculation
For the calculation of reinforcing bars of 6 m, the number of pieces, the length of the bar and – for the reinforcing steel – the meter weight is used. The weight of a ribbed steel is calculated according to the formula Weight (kg/m) = d² × 0.00617 with D in millimeters. The total weight, which forms the basis for the preparation of the offer, can be determined from the parts list or reinforcement plan. Send us your list – we calculate the position and name a binding fixed price offer.
Alternatives and suitable additions
Depending on the construction task, reinforcing bars 6 m can be combined with other reinforcement products. Proven additions are12m poles,straight cutas well asreinforcing steel. Which combination makes economic and static sense depends on the component and the prefabrication depth. We advise you on the appropriate compilation.
Common mistakes – and how to avoid them
- Wrong concrete cover:Without suitable spacers there is a risk of corrosion – match the height to the exposure class.
- Too Short Overlap:Do not estimate shocks according to static specifications.
- Confused positions:Clearly label the components and install them according to the reinforcement plan.
- Missing documentation:The reinforcement can only be tested and approved with a work certificate.
Sustainability of reinforcing bars 6 m
Reinforced steel is almost 100% recyclable and is mainly made from scrap in the electric arc furnace. A needs-based prefabrication of 6 m of reinforcing steel bars reduces waste and transport. Those who plan quantities and dimensions cleanly not only build in accordance with the standards, but also in a resource-saving manner – an advantage that is increasingly in demand when it comes to proof of sustainability.
Why buy from us?
- Standard-compliant reinforcing bars 6 m according to DIN 488
- Production according to your reinforcement or list
- Work certificate (3.1) and traceability
- Germany-wide delivery, roof on request
- Binding fixed price offer without hidden costs
Delivery of reinforcing bars 6 m
We deliver reinforcement bars 6 m throughout Germany and on request to Austria, Switzerland and Luxembourg – from the individual position to the complete component reinforcement, position exactly according to your list. A realistic delivery date and the unloading point will be coordinated in advance.
Order reinforcing bars 6 m – step by step
- Provide reinforcement plan or list or dimensions and quantity
- Define product and execution
- Request a non-binding fixed price offer
- Vote for delivery date and unloading point
- Position-accurate delivery to the construction site
You can get your offer on our websiteContact.
Conclusion: Reinforcing bars 6 m
Reinforced steel bars 6 m are standard-compliant reinforcement according to DIN 488 – B500B concrete bars in the standard length 6.00 m as a bearing length for flexible processing on the construction site. With factory prefabrication, complete documentation and Germany-wide delivery, you will receive sustainable, durable and economic reinforcement. Request your fixed price offer.
Frequently Asked Questions about Reinforcing Bars 6 m
What material are reinforcing bars made of 6 m?
Reinforced steel bars 6 m are made of rebar B500B and are manufactured according to DIN 488.
What are reinforcing bars 6 m used for?
Reinforced bars 6 m are used, among other things, for smaller construction sites, repairs and flexible reinforcement. The exact selection is given by the statics.
Are reinforcing bars made to measure 6 m?
yes We manufacture reinforcement bars 6 m according to your reinforcement or list and deliver accurately position.
Do you supply reinforcing bars 6 m with test certificate?
yes Reinforcement bars 6 m are supplied with factory certificate (3.1) and proof of conformity and are traceable.
Where do you deliver reinforcing bars 6 m?
We deliver reinforcement bars 6 m throughout Germany and on request to Austria, Switzerland and Luxembourg.
Weiterführende Quellen: Betonstahl (Wikipedia), Bewehrung im Stahlbetonbau. Reinforcement steel 6 m erhalten Sie bei der Bewehrungsstahl Deutschland GmbH normgerecht nach DIN 488 – projektbezogen und bundesweit geliefert.