Reinforcing steel in rings (coil)Buy from us in accordance with DIN 488 and delivered throughout Germany. Reinforced steel in rings (coil) are rebar B500B, which is supplied as a ring or coil and processed on straightening and cutting systems. On this page you will find all information about reinforcing steel in rings (Coil): features, applications, workmanship, standards, quality and order.
What are rebars in rings (coil)?
Reinforced steel in rings (coil) are rebar B500B, which is supplied as a ring or coil and processed on straightening and cutting systems. As a specialist retailer for reinforcing steel, we deliver reinforcement steel in rings (coil) of consistent quality, documented in accordance with the standards and on time to the construction site. Our site offers an overview of the entire rangereinforcing steel.
Features of reinforcing steel rings (coil)
- Reinforced steel B500B in ring/coil
- for straightening and cutting systems
- diameter up to approx. 16 mm
- Economical for series production
- low waste
| characteristic value | Specification |
|---|---|
| Product | Reinforcing steel in rings (coil) |
| Material | Reinforcing steel B500B |
| Standard | DIN 488 |
| Delivery | Germany-wide, on request roof |
| Production | Custom made / list |
Applications for reinforcing steel in rings (coil)
Reinforced steel in rings (coil) are mainly used in reinforced concrete construction for:
- Automated Bending
- Series production of temples
- mat production
- prefabricated works
The concrete selection and dimensioning results from the static calculation according to Eurocode 2.Bending & Cuttingandmonierreisen.
Reinforced steel rings (coil) according to DIN 488 and Eurocode 2
The reinforcement steel used corresponds to the DIN 488 product standard. The Eurocode 2 (DIN EN 1992-1-1) applies to design and execution – concrete cover, anchorage, overlap and minimum reinforcement. This means that reinforcement steel in rings (coil) is load-bearing, durable and verifiable. Each delivery is made with the required proof.
processing and installation
Reinforcement steel in rings (coil) are positioned according to the reinforcement plan, fixed with binding wire and held in the planned concrete cover via spacers. Shocks and connections are executed over the required overlap lengths. Factory-assembled elements significantly reduce the assembly time on the construction site, since cutting and bending work is no longer necessary.
Quality, test certificate and traceability
We supply reinforcing steel in rings (coil) with work certificate (acceptance test certificate 3.1) and proof of conformity. The reinforcement steel used can be traced via the batch and melt number – this gives you standard-compliant, documented reinforcement that meets the requirements of DIN 488 and Eurocode 2.
economy and prefabrication
Prefabricated reinforcement steel rings (coil) save time and costs: they are delivered ready for installation, reduce waste and speed up the construction process. Those who plan material, dimensions and delivery dates cleanly reinforce their standards and economically. We would be happy to create a position from your reinforcement list.
Concrete cover and exposure classes
The durability of reinforced concrete depends crucially on the concrete cover. The Eurocode 2 (DIN EN 1992-1-1) sets the minimum concrete coverage, depending on the exposure class (e.g. XC1 for dry interiors, XC4 for alternating wet areas, XD/XS for chloride loaded areas). feast. For reinforcing steel rings (coil) spacers are used at the appropriate height to reliably maintain this dimension. Insufficient concrete cover leads to corrosion and cracks; A correctly executed cover ensures the planned useful life. Fittingspacerwe deliver with.
| exposure class | Typical environment | Minimum Concrete Coverage (Guide Value) |
|---|---|---|
| XC1 | Dry interiors | approx. 20 mm |
| XC3 / XC4 | External parts, alternating damp | approx. 25-35 mm |
| xD / XS | de-icing salt, sea water | approx. 40-55 mm |
The exact values result from the exposure class, concrete strength and verification according to Eurocode 2.
anchoring and overlap
To ensure that the tensile forces are safely introduced into the concrete, rods must be sufficiently anchored and pushed. The required anchoring length and joint length of joints depend on the grade of steel, diameter, concrete strength and composite conditions. In the case of reinforcing steel in rings (coil), these lengths are taken into account in the reinforcement plan – as a fist value, overlapping lengths in the ribbed reinforcement steel are in the range of 40 to 60 times the rod diameter, depending on the boundary conditions. The static calculation is always decisive.
Tolerances and quality features according to DIN 488
DIN 488 not only regulates the material parameters, but also dimensional tolerances, rib geometry and marking of the reinforcing steel. Ribbed reinforcing steel is clearly identifiable on its rib pattern; The yield point is 500 N/mm². For reinforcing steel in rings (coil), this means: defined bending dimensions, consistent quality and a complete allocation to standard and batch. This verifiability is the basis of any statically load-bearing reinforcement.
Quantity determination and calculation
For the calculation of reinforcing steel in rings (coil), the number of pieces, the length of the bar and – in the case of reinforcing steel – the meter weight are used. The weight of a ribbed steel is calculated according to the formula Weight (kg/m) = d² × 0.00617 with D in millimeters. The total weight, which forms the basis for the preparation of the offer, can be determined from the parts list or reinforcement plan. Send us your list – we calculate the position and name a binding fixed price offer.
Alternatives and suitable additions
Depending on the construction task, reinforcement steel in rings (coil) can be combined with other reinforcement products. Proven additions arereinforcing steel,Bending & Cuttingas well asmonierreisen. Which combination makes economic and static sense depends on the component and the prefabrication depth. We advise you on the appropriate compilation.
Common mistakes – and how to avoid them
- Wrong concrete cover:Without suitable spacers there is a risk of corrosion – match the height to the exposure class.
- Too Short Overlap:Do not estimate shocks according to static specifications.
- Confused positions:Clearly label the components and install them according to the reinforcement plan.
- Missing documentation:The reinforcement can only be tested and approved with a work certificate.
Sustainability of reinforcing steel in rings (coil)
Reinforced steel is almost 100% recyclable and is mainly made from scrap in the electric arc furnace. A needs-based prefabrication of reinforcing steel in rings (coil) reduces waste and transport. Those who plan quantities and dimensions cleanly not only build in accordance with the standards, but also in a resource-saving manner – an advantage that is increasingly in demand when it comes to proof of sustainability.
Why buy from us?
- Standard-compliant reinforcing steel in rings (coil) according to DIN 488
- Production according to your reinforcement or list
- Work certificate (3.1) and traceability
- Germany-wide delivery, roof on request
- Binding fixed price offer without hidden costs
Supply of reinforcing steel in rings (coil)
We deliver reinforcement steel in Ringen (Coil) throughout Germany and on request to Austria, Switzerland and Luxembourg – from the individual position to the complete component reinforcement, position exactly according to your list. A realistic delivery date and the unloading point will be coordinated in advance.
Order reinforcing steel in rings (coil) – step by step
- Provide reinforcement plan or list or dimensions and quantity
- Define product and execution
- Request a non-binding fixed price offer
- Vote for delivery date and unloading point
- Position-accurate delivery to the construction site
You can get your offer on our websiteContact.
Conclusion: Reinforcing steel in rings (coil)
Reinforced steel in rings (coil) are standard-compliant reinforcement according to DIN 488 – reinforcing steel B500B, which is supplied as a ring or coil and processed on straightening and cutting systems. With factory prefabrication, complete documentation and Germany-wide delivery, you will receive sustainable, durable and economic reinforcement. Request your fixed price offer.
Frequently Asked Questions about Reinforcing Steel Rings (Coil)
What material are reinforcing steel in rings (coil) made of?
Reinforced steel in rings (coil) are made of rebar B500B and are manufactured according to DIN 488.
What are concrete steel in rings (coil) used for?
Reinforced steel in rings (coil) are used, among other things, for automated bending, series production of brackets, mat production. The exact selection is given by the statics.
Are reinforcing steel rings (coil) made to measure?
yes We manufacture reinforcement steel in rings (coil) on a project-related basis according to your reinforcement or list and deliver exactly the position.
Do you supply reinforcing steel in rings (coil) with test certificate?
yes Reinforced steel in rings (coil) are supplied with work certificate (3.1) and proof of conformity and are traceable.
Where do you deliver reinforcing steel in rings (coil)?
We deliver reinforcement steel in Ringen (Coil) throughout Germany and on request to Austria, Switzerland and Luxembourg.
Weiterführende Quellen: Betonstahl (Wikipedia), Bewehrung im Stahlbetonbau. Buy reinforcing steel erhalten Sie bei der Bewehrungsstahl Deutschland GmbH normgerecht nach DIN 488 – projektbezogen und bundesweit geliefert.