Straight concrete bar cutBuy from us in accordance with DIN 488 and delivered throughout Germany. Concrete bar steel straight cut are cut to the fixed length B500B according to your cut list – made to measure and with little waste. On this page you will find all the information about bars straight cut: features, applications, workmanship, standards, quality and order.
What are bars cut straight?
Concrete bar steel straight cut are cut to the fixed length B500B according to your cut list – made to measure and with little waste. As a specialist retailer for reinforcing steel, we deliver straight-cut concrete bars in consistent quality, documented in accordance with the standards and on time to the construction site. Our site offers an overview of the entire rangecurved to measure.
Characteristics of reinforcing bars straight cut
- Straight bars cut to fixed size
- Reinforced steel B500B according to DIN 488
- Diameter 6-40 mm
- Production by cut list
- low waste
| characteristic value | Specification |
|---|---|
| Product | Straight concrete bar cut |
| Material | Reinforcing steel B500B |
| Standard | DIN 488 |
| Delivery | Germany-wide, on request roof |
| Production | Custom made / list |
Reinforced bars applications straight cut
Concrete bars straight cut are used in reinforced concrete construction primarily for:
- longitudinal reinforcement
- connecting rods
- All components with straight rods
- Foundations, ceilings, walls
The concrete selection and dimensioning results from the static calculation according to Eurocode 2.monierreisenandBending & Cutting.
Concrete bar steel straight cut to DIN 488 and Eurocode 2
The reinforcement steel used corresponds to the DIN 488 product standard. The Eurocode 2 (DIN EN 1992-1-1) applies to design and execution – concrete cover, anchorage, overlap and minimum reinforcement. This means that concrete bars are straight cut, durable and testable. Each delivery is made with the required proof.
processing and installation
Reinforced bars straight cut are positioned according to reinforcement plan, fixed with binding wire and held in the planned concrete cover over spacers. Shocks and connections are executed over the required overlap lengths. Factory-assembled elements significantly reduce the assembly time on the construction site, since cutting and bending work is no longer necessary.
Quality, test certificate and traceability
We supply straight cut steel bar cut with factory certificate (acceptance test certificate 3.1) and proof of conformity. The reinforcement steel used can be traced via the batch and melt number – this gives you standard-compliant, documented reinforcement that meets the requirements of DIN 488 and Eurocode 2.
economy and prefabrication
Prefabricated concrete bars straight cut save time and costs: They are delivered ready for installation, reduce waste and speed up the construction process. Those who plan material, dimensions and delivery dates cleanly reinforce their standards and economically. We would be happy to create a position from your reinforcement list.
Concrete cover and exposure classes
The durability of reinforced concrete depends crucially on the concrete cover. The Eurocode 2 (DIN EN 1992-1-1) sets the minimum concrete coverage, depending on the exposure class (e.g. XC1 for dry interiors, XC4 for alternating wet areas, XD/XS for chloride loaded areas). feast. Straight cut spacers are used at the appropriate height to reliably maintain this dimension. Insufficient concrete cover leads to corrosion and cracks; A correctly executed cover ensures the planned useful life. Fittingspacerwe deliver with.
| exposure class | Typical environment | Minimum Concrete Coverage (Guide Value) |
|---|---|---|
| XC1 | Dry interiors | approx. 20 mm |
| XC3 / XC4 | External parts, alternating damp | approx. 25-35 mm |
| xD / XS | de-icing salt, sea water | approx. 40-55 mm |
The exact values result from the exposure class, concrete strength and verification according to Eurocode 2.
anchoring and overlap
To ensure that the tensile forces are safely introduced into the concrete, rods must be sufficiently anchored and pushed. The required anchoring length and joint length of joints depend on the grade of steel, diameter, concrete strength and composite conditions. In the case of straight bars, these lengths are taken into account in the reinforcement plan – as a fist value, overlap lengths in the ribbed reinforcement steel are in the range of 40 to 60 times the diameter of the bar, depending on the boundary conditions. The static calculation is always decisive.
Tolerances and quality features according to DIN 488
DIN 488 not only regulates the material parameters, but also dimensional tolerances, rib geometry and marking of the reinforcing steel. Ribbed reinforcing steel is clearly identifiable on its rib pattern; The yield point is 500 N/mm². Straight cut for concrete bar steel means: defined bending dimensions, consistent quality and complete allocation to standard and batch. This verifiability is the basis of any statically load-bearing reinforcement.
Quantity determination and calculation
The number of pieces, rod length and – for reinforcing steel – the meter weight are used for the calculation of concrete bars straight. The weight of a ribbed steel is calculated according to the formula Weight (kg/m) = d² × 0.00617 with D in millimeters. The total weight, which forms the basis for the preparation of the offer, can be determined from the parts list or reinforcement plan. Send us your list – we calculate the position and name a binding fixed price offer.
Alternatives and suitable additions
Depending on the construction task, concrete bars can be straight cut and combined with other reinforcement products. Proven additions arecurved to measure,monierreisenas well asBending & Cutting. Which combination makes economic and static sense depends on the component and the prefabrication depth. We advise you on the appropriate compilation.
Common mistakes – and how to avoid them
- Wrong concrete cover:Without suitable spacers there is a risk of corrosion – match the height to the exposure class.
- Too Short Overlap:Do not estimate shocks according to static specifications.
- Confused positions:Clearly label the components and install them according to the reinforcement plan.
- Missing documentation:The reinforcement can only be tested and approved with a work certificate.
Sustainability of concrete bar steel straight cut
Reinforced steel is almost 100% recyclable and is mainly made from scrap in the electric arc furnace. A needs-based prefabrication of straight-cut concrete bars cuts cuts and transports. Those who plan quantities and dimensions cleanly not only build in accordance with the standards, but also in a resource-saving manner – an advantage that is increasingly in demand when it comes to proof of sustainability.
Why buy from us?
- Standard concrete bars straight cut according to DIN 488
- Production according to your reinforcement or list
- Work certificate (3.1) and traceability
- Germany-wide delivery, roof on request
- Binding fixed price offer without hidden costs
Supply of barbed steel straight cut
We deliver straight cut concrete bars throughout Germany and on request to Austria, Switzerland and Luxembourg – from the individual position to the complete component reinforcement, position exactly according to your list. A realistic delivery date and the unloading point will be coordinated in advance.
Order concrete bar steel straight cut – step by step
- Provide reinforcement plan or list or dimensions and quantity
- Define product and execution
- Request a non-binding fixed price offer
- Vote for delivery date and unloading point
- Position-accurate delivery to the construction site
You can get your offer on our websiteContact.
Conclusion: concrete bar straight cut
Reinforcement according to standard DIN 488 – cut to fixed length B500B according to your cut list – are cut to size and with little waste. With factory prefabrication, complete documentation and Germany-wide delivery, you will receive sustainable, durable and economic reinforcement. Request your fixed price offer.
Frequently Asked Questions about Reinforced Bars Straight Cut
What material were concrete bars made of straight cut?
Concrete bars straight cut are made of rebar B500B and are manufactured according to DIN 488.
What are the straight cuts used for straight cuts?
Concrete bars straight cut are used, among other things, for longitudinal reinforcement, connecting rods, all components with straight rods. The exact selection is given by the statics.
Are concrete bars straight cut made to measure?
yes We manufacture straight-cut concrete bars according to your reinforcement or list and deliver accurately positioned.
Do you supply straight rebar cut with test certificate?
yes Concrete bar steel straight cut are supplied with factory certificate (3.1) and proof of conformity and are traceable.
Where do you deliver straight reinforcement bars?
We deliver straight cut reinforcement bars throughout Germany and on request to Austria, Switzerland and Luxembourg.
Weiterführende Quellen: Betonstahl (Wikipedia), Bewehrung im Stahlbetonbau. Buy concrete bar steel erhalten Sie bei der Bewehrungsstahl Deutschland GmbH normgerecht nach DIN 488 – projektbezogen und bundesweit geliefert.